Outdoor Nativity Set

Last Christmas, over a couple of weeks, I used more of the recovered plywood, and scrap 2×3 framing, to make this nativity scene for the street corner outside our house.

  • I found suitable cliparts which I printed onto old overhead transparencies, and using an old overhead projector from the school where I work I traced the images directly onto the plywood.The plywood was then cut out using a tv-special tool called a Home Renovator. It’s not a great tool, but I find it much nicer than I jigsaw for cutting thin plywood.
    IMG_3969
  • 2015-12-19 20.09.13
Print Friendly, PDF & Email